关于ATP运行出错，KILL=12~

黑皮椰子 · 发表于 2011-3-22 18:58:40

马上加入，结交更多好友，共享更多资料，让你轻松玩转电力研学社区！

您需要登录才可以下载或查看，没有账号？立即加入

×

我在仿变电站的时候多处出现KILL=12的错误，不明白为什么，希望高手给予指点。
KILL = 12. The bus name that was read from columns 3-8 of the last source card is unrecognizable, not having been previously
defined by a branch card or a switch card. The name read from the data card is " ". The user is not allowed to connect
sources to network nodes that are not a part of the network that was previously defined by branch and switch cards of this data
case. Any such new node would be completely disconnected from the network, so could not affect the solution. Most probably, one or
more spelling errors (including the positioning of imbedded blanks) have been made in the keying of one or more node names on EMTP
data cards.

chendong2013 · 发表于 2011-3-23 17:11:37

不了解，是美女，帮顶。

rankjet · 发表于 2011-4-20 20:59:05

也不了解。。帮顶

liuxingyu23 · 发表于 2011-7-6 23:17:50

搭车同求解答！

chr_sun@126.com · 发表于 2011-7-16 15:31:27

应该是节点的问题吧建议全部复制到一个新新建文件下，重新仿。。。。不对的话，多试试。。。总会好的

mingyu · 发表于 2011-7-16 18:51:50

The bus name that was read from columns 3-8 of the last source card is unrecognizable, not having been previously
defined by a branch card or a switch card. The name read from the data card is " ". The user is not allowed to connect
sources to network nodes that are not a part of the network that was previously defined by branch and switch cards of this data
case.

tianming · 发表于 2011-11-17 12:05:10

节点命名的问题，

账号		自动登录	找回密码
密码			立即加入

关于ATP运行出错，KILL=12~

马上加入，结交更多好友，共享更多资料，让你轻松玩转电力研学社区！

相关帖子