ATP运行出现错误，求大神指导

heshuiniubi

You lose, fella.   The EMTP logic has detected an error condition, and is now going to terminate program execution.  The following
message summarizes the circumstances leading to this situation.  Where an otherwise-unidentified data card is referred to, or where
the "last" card is mentioned, it is the most recently read card of the input data that is meant.  The 80-column image of this card
: T) g5 {- ~$ @/ m  D( B0 o/ Xis generally the last one printed out prior to this termination message.  But possibly this last-read card has not yet been
displayed, so a copy follows:
"                                                                                "
, P. z0 \& C, m- ^! B* F; |1 H& ~: x              KILL code number                Overlay number               Nearby statement number
9 E9 E% [- ]5 p) d  a$ E* L                          1                         13                               8109
KILL = 1.   Storage exceeded for EMTP List Number 8.   See the dimensioned limit in the case-summary statistics below.  The problem
+ O7 K/ g/ e; [* l1 i. Pis simply too big for the program as currently dimensioned.  Yet, do not forget dynamic dimensioning as described in the Oct., 1993,
3 e+ a4 L1 l- z& b5 enewsletter.   In this case,  edit  LISTSIZE.DAT to increase table sizes,  and then try again.   Of course, such dynamic expansion is
possible only within limits fixed by  LISTSIZE.BPA  (used by variable-dimensioning program  "VARDIM"  as ATP is to be linked).
Sometimes the reason for EMTP table overflow is unclear, and Program Maintenance might wish to inspect the contents of the error
interface vectors  LSTAT  and  FLSTAT.    These now follow.   First comes  LSTAT,  using (12I10) encoding; then comes  FLSTAT,
using (8E15.6) encoding:
LSTAT =     -9999     -9999     -9999     -9999     -9999     -9999     -9999     -9999     -9999     -9999        10        80
5 J( ~( {0 p( uLSTAT =       323         0     -9999         8       324         0      8109     -9999       116       155       323         7
9 [% \( P6 e4 J# a% EFLSTAT =   1.562500E-02   1.562500E-02   7.812500E-02   7.812500E-02   0.000000E+00   0.000000E+00   0.000000E+00   0.000000E+00
FLSTAT =   0.000000E+00   0.000000E+00   0.000000E+00   5.000000E+01   6.000000E+01   0.000000E+00   0.000000E+00   0.000000E+00
FLSTAT =   0.000000E+00   0.000000E+00   0.000000E+00   0.000000E+00   0.000000E+00   0.000000E+00   0.000000E+00   0.000000E+00
Yet maybe the user would like some suggestions as to why the table in question  (List Number 8 )  has overflowed.   If such further
; j' x: s0 |; u$ e' w' ninformation is available,  it will now follow immediately ....
' ^8 \2 J" l0 M$ X; a* W# @. z+ h' IList 8 stores past history points for distributed-parameter transmission circuits (lines or cables) in modal form.   Each
3 Z. ]# y" h7 {propagation mode requires storage, and there are as many modes as there are coupled conductors or phases (e.g., a double-circuit
' O/ R5 i+ E" g2 ~8 o' Vline will normally have 6 modes).  Each mode requires TAU / DELTAT  entries,  where TAU is the modal travel time of the line,
DELTAT is the time-step size,  and the division involves integer truncation followed by the addition of unity.
  @' f' N9 O! kIn order to effectively trade memory space among the different EMTP tables (EMTP List Sizes), the user must know how many arrays
(columns) there are in each table.  The following tabulation shows the effective multiplicities that are associated with each
independent EMTP List Size (those lists whose lengths are under user control by means of the EMTP variable-dimensioning program
"VARDIM").
-------------1------------------------------------------------------------------------------------------------------------
0 o* e; V. e+ G& q6 X" N
% g4 {, F! C) n, ?- F8 w6 `List Number  1   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27

-------------1------------------------------------------------------------------------------------------------------------
# h. E1 K! l0 ~" Z3 G: j
Floating Pt. 1   6   5   3   6   1  12   2   2   8   3   1   4   8   1   2   2   0   6   1   1  24   2   1   #   *   1
Integer      1   4   7   0   2   1  10   0   0  11   0   3   0   4   0   0   2   1  10   2   0   0   0   0   0   0   0
6 D4 i+ r& ~* p+ Y/ e9 bTotal        1  10  12   3   8   2  22   2   2  19   3   4   4  12   1   2   1  16   3   1  24   2   1   #   *   1

( Y/ H7 S: }8 A. H# L-------------1------------------------------------------------------------------------------------------------------------
0 J- f" t1 v7 l: S' }
# --- Used only for virtual computers (Burroughs, PRIME, VAX, Apollo, etc.).    Others can ignore this List.
* --- Rather than count List 24 itself,  add the value to the floating-point  and total counts for Lists 1 and 6.

mingyu

乍一看一堆乱码？

螃蟹飞飞

你的数据溢出了，需要重新设置一下LISTSIZE.DAT
4 j+ r# Q) U, W  s开始菜单-ATP-ATP Launcher-Tools-Make Tpbig.exe
  [; ]" L/ Z" X( w9 \' e5 V$ iChange Listsize打勾，然后把第八个值改大一点，然后再运行一遍试一试
我上次遇到过相同的问题，就是这么解决的
5 ?5 o; D( W4 G6 ]) I3 Ihttps://tech.cepsc.com/thread-85044-1-1.html

heshuiniubi

回复 3# 螃蟹飞飞
非常感谢，我试了一下，还真是这么回事。多谢了啊！

acs

想请问一下listsize中的参数的修改有什么限制么？

986305096

螃蟹飞飞 发表于 2012-12-6 05:04
你的数据溢出了，需要重新设置一下LISTSIZE.DAT
' r' v4 s" Q( g7 {- k' y开始菜单-ATP-ATP Launcher-Tools-Make Tpbig.exe
$ D4 y# }( j7 V& n/ }0 u: xChange ...

8 e$ p; _  l$ H1 Q' o3 ^                               
登录/注册后可看大图

第一行第八个数吗？改成多大合适呢
. a: z9 _' t+ h5 U1 Z  ]1 {

986305096

heshuiniubi 发表于 2012-12-6 12:21
% _$ E: ^% F. w3 t( T回复 3# 螃蟹飞飞
3 k: m' Y7 \$ z& D1 X7 ]9 k非常感谢，我试了一下，还真是这么回事。多谢了啊！

具体是哪个数据啊
* z( g8 [6 P$ H; d+ M* X; a# ]

wangchaoqun

986305096 发表于 2019-4-2 20:35
具体是哪个数据啊

从第一个数到第八个就好了呀

9 L  [- O: [* P5 u2 i6 D) l: O

986305096

wangchaoqun 发表于 2019-4-8 22:08
从第一个数到第八个就好了呀

横向数第八个数吗
) m8 r; W9 i) |) W4 ~' z" R

wangchaoqun

986305096 发表于 2019-4-12 10:38
横向数第八个数吗

( t: ^9 |$ g4 c1 W# P+ g9 `是啊，我修改的就是
' }  l; |9 P9 r% T3 Q
" O- r3 M- N9 U9 S
& G6 A" t2 t/ M$ C6 ^1 i