高手进 ATP仿真提示错误

wenjin132

错误原因在哪里？  高手指点，谢谢！
; u0 `0 k- |* Y; R  f4 G6 I
You lose, fella.   The EMTP logic has detected an error condition, and is now going to terminate program execution.  The following
# q' K* M7 O9 ?, rmessage summarizes the circumstances leading to this situation.  Where an otherwise-unidentified data card is referred to, or where
the "last" card is mentioned, it is the most recently read card of the input data that is meant.  The 80-column image of this card
6 M, t: q4 H# b6 T0 N- }' s- Xis generally the last one printed out prior to this termination message.  But possibly this last-read card has not yet been
8 j6 @0 }, {( i9 }% r+ Ddisplayed, so a copy follows:
1 n3 m6 {* U! R0 d "  X0002A                                                                        "
9 C, E" M7 P; s7 z5 k              KILL code number                Overlay number               Nearby statement number
                          1                         12                               1537
4 U* u; X) ~; T1 |KILL = 1.   Storage exceeded for EMTP List Number 8.   See the dimensioned limit in the case-summary statistics below.  The problem
is simply too big for the program as currently dimensioned.  Yet, do not forget dynamic dimensioning as described in the Oct., 1993,
; o% x2 V* d% b/ o; tnewsletter.   In this case,  edit  LISTSIZE.DAT to increase table sizes,  and then try again.   Of course, such dynamic expansion is
9 P* n6 i" Z5 m5 h! @possible only within limits fixed by  LISTSIZE.BPA  (used by variable-dimensioning program  "VARDIM"  as ATP is to be linked).
Sometimes the reason for EMTP table overflow is unclear, and Program Maintenance might wish to inspect the contents of the error
interface vectors  LSTAT  and  FLSTAT.    These now follow.   First comes  LSTAT,  using (12I10) encoding; then comes  FLSTAT,
" Z; Y: h) h$ T& musing (8E15.6) encoding:
0 R% e  h# ~6 a: yLSTAT =     -9999     -9999     -9999     -9999     -9999     -9999     -9999     -9999     -9999     -9999         0         1
LSTAT =        12        73     -9999         8        13         0      1537     -9999         7         6        12         3
, f& d6 E5 \- i8 U$ q5 B( FFLSTAT =   1.562500E-02   1.562500E-02   1.562500E-02   1.562500E-02   0.000000E+00   0.000000E+00   0.000000E+00   0.000000E+00
1 D% q" u' D/ y6 B! V! ?' yFLSTAT =   0.000000E+00   0.000000E+00   0.000000E+00   5.000000E+01   6.000000E+01   0.000000E+00   0.000000E+00   0.000000E+00
FLSTAT =   0.000000E+00   0.000000E+00   0.000000E+00   0.000000E+00   0.000000E+00   0.000000E+00   0.000000E+00   0.000000E+00
' b: u8 L5 u9 c' H/ TYet maybe the user would like some suggestions as to why the table in question  (List Number 8 )  has overflowed.   If such further
- W. O2 S& B4 K' S2 O4 ]. }1 Binformation is available,  it will now follow immediately ....
List 8 stores past history points for distributed-parameter transmission circuits (lines or cables) in modal form.   Each
propagation mode requires storage, and there are as many modes as there are coupled conductors or phases (e.g., a double-circuit
line will normally have 6 modes).  Each mode requires TAU / DELTAT  entries,  where TAU is the modal travel time of the line,
DELTAT is the time-step size,  and the division involves integer truncation followed by the addition of unity.
In order to effectively trade memory space among the different EMTP tables (EMTP List Sizes), the user must know how many arrays
(columns) there are in each table.  The following tabulation shows the effective multiplicities that are associated with each
independent EMTP List Size (those lists whose lengths are under user control by means of the EMTP variable-dimensioning program
"VARDIM").

gggurou

你是做什么的仿真。最好把仿真图贴出来

markangle

hhhhhhhhhhhhhhh

乐活人生

不好意思 帮不了你 不太会

wmjoan

回复之后看帖子了~~~

yb2006027

试着增大步长，此外再检查下各元件参数看是否合理。。。

tianming

计算规模超过了软件参数设置的限值。

yuexingfu

路过，顶一下