仿真时出现错误，如正文，请各位指教

白夜风起 · 发表于 2009-7-27 15:46:27

马上加入，结交更多好友，共享更多资料，让你轻松玩转电力研学社区！

您需要登录才可以下载或查看，没有账号？立即加入

×

本帖最后由白夜风起于 2009-7-27 17:02 编辑

如题，我看了下出错的提示：the bus name that was read from columns 3-8 of the last source card is unrecognizable,not having been previsously defined by a branch card or a switch card. 大意就是说我用了没有先前定义好的节点名称，可是我都定义了的，是不是有我没有注意到的细节问题啊，请各位大侠帮忙

dongchch · 发表于 2009-7-28 14:36:17

如题，我看了下出错的提示：the bus name that was read from columns 3-8 of the last source card is unrecognizable,not having been previsously defined by a branch card or a switch card. 大意就是说我用了没 ...
% |0 R! ~# h7 Z1 p. }白夜风起发表于 2009-7-27 15:46

2 O* K3 [0 l V
登录/注册后可看大图

这也是个比较常见的错误提示，具体哪个元件有问题，没有模型不太好判断，你可以逐一隐藏元件，测试一下，看看究竟是哪个出了问题，找出哪个出了问题就比较好解决了

白夜风起 · 发表于 2009-7-29 11:07:13

这也是个比较常见的错误提示，具体哪个元件有问题，没有模型不太好判断，你可以逐一隐藏元件，测试一下，看看究竟是哪个出了问题，找出哪个出了问题就比较好解决了" X- Z6 e9 O/ H: x/ i
dongchch 发表于 2009-7-28 14:36

0 c# @, [% c! X; f5 L! o. o
登录/注册后可看大图

多谢兄台了现在就是这个连接电源的地方有问题，请问电源的参数以及连线怎么个高法，你有没有个例子麻烦你了

dongchch · 发表于 2009-7-30 14:36:52

你用的是什么电源呢，如果能上张图就好了！

白夜风起 · 发表于 2009-7-30 18:08:02

多谢各位了，我这就传上图片，仿真就是没法通过，我搞的是一个电流互感器模型，有点郁闷 QQ截图未命名.JPG

dongchch · 发表于 2009-7-30 18:20:11

你用的是理想变压器么，这是一个极容易出错的元件，我想电源本身没有问题的

白夜风起 · 发表于 2009-7-31 08:38:09

6# dongchch

是的，我用的就是理想变压器，单相的，他有哪些容易出错的地方，多谢指教

白夜风起 · 发表于 2009-7-31 11:51:29

ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/
ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/
------------------------------------------------------------------------------------------------------------------------------------
You lose, fella. The EMTP logic has detected an error condition, and is now going to terminate program execution.  The following
message summarizes the circumstances leading to this situation.  Where an otherwise-unidentified data card is referred to, or where
the "last" card is mentioned, it is the most recently read card of the input data that is meant.  The 80-column image of this card
is generally the last one printed out prior to this termination message.  But possibly this last-read card has not yet been
displayed, so a copy follows:
"14XX0038-1    1.E3    50.                                  -1.       1."
            KILL code number             Overlay number             Nearby statement number
                     12                         5                            4246
KILL = 12. The bus name that was read from columns 3-8 of the last source card is unrecognizable, not having been previously
defined by a branch card or a switch card.  The name read from the data card is  "XX0038". The user is not allowed to connect
sources to network nodes that are not a part of the network that was previously defined by branch and switch cards of this data
case.  Any such new node would be completely disconnected from the network, so could not affect the solution.  Most probably, one or
more spelling errors (including the positioning of imbedded blanks) have been made in the keying of one or more node names on EMTP
data cards.
------------------------------------------------------------------------------------------------------------------------------------
ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/
ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR

shuzhiyun · 发表于 2009-7-31 17:11:48

这是“电流互感器”模型？学习了。一个电源、一个电流互感器，请教是做什么仿真？版主：一个非线性电感并联一个电阻是电流互感器吗？我英文看不懂，去网上翻译也是乱七八糟，看了好像填卡有问题。楼主是否可以把题目再说得明白一点？

小剑 · 发表于 2009-7-31 19:38:13

恩，不错，学了好多东东

账号		自动登录	找回密码
密码			立即加入

[讨论] 仿真时出现错误，如正文，请各位指教

马上加入，结交更多好友，共享更多资料，让你轻松玩转电力研学社区！

相关帖子

浏览过的版块