仿真时出现错误，如正文，请各位指教

白夜风起

! u  @3 L2 z+ b3 p0 T) N! Y如题，我看了下出错的提示：the bus name that was read from columns 3-8 of the last source card is unrecognizable,not having been previsously defined by a branch card or a switch card. 大意就是说我用了没有先前定义好的节点名称，可是我都定义了的，是不是有我没有注意到的细节问题啊，请各位大侠帮忙

dongchch

如题，我看了下出错的提示：the bus name that was read from columns 3-8 of the last source card is unrecognizable,not having been previsously defined by a branch card or a switch card. 大意就是说我用了没 ...
  ?7 I: @6 _0 i4 Q白夜风起 发表于 2009-7-27 15:46

) b  @! }' d  a- O2 T) D9 s# ]2 ]                               
登录/注册后可看大图

这也是个比较常见的错误提示，具体哪个元件有问题，没有模型不太好判断，你可以逐一隐藏元件，测试一下，看看究竟是哪个出了问题，找出哪个出了问题就比较好解决了

白夜风起

这也是个比较常见的错误提示，具体哪个元件有问题，没有模型不太好判断，你可以逐一隐藏元件，测试一下，看看究竟是哪个出了问题，找出哪个出了问题就比较好解决了
. A3 M/ i9 _/ X; H0 Ddongchch 发表于 2009-7-28 14:36

1 J% o  K7 z2 d" c+ ?1 f  L                               
登录/注册后可看大图

; x8 a" \3 x5 A# t: x多谢兄台了  现在就是这个连接电源的地方有问题，请问电源的参数以及连线怎么个高法，你有没有个例子麻烦你了

dongchch

你用的是什么电源呢，如果能上张图就好了！

白夜风起

多谢各位了，我这就传上图片，仿真就是没法通过，我搞的是一个电流互感器模型，有点郁闷

dongchch

你用的是理想变压器么，这是一个极容易出错的元件，我想电源本身没有问题的

白夜风起

6# dongchch


- M1 Z" }4 D- L: j, N是的，我用的就是理想变压器，单相的，他有哪些容易出错的地方，多谢指教

白夜风起

ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/
ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/
------------------------------------------------------------------------------------------------------------------------------------
You lose, fella.   The EMTP logic has detected an error condition, and is now going to terminate program execution.  The following
message summarizes the circumstances leading to this situation.  Where an otherwise-unidentified data card is referred to, or where
the "last" card is mentioned, it is the most recently read card of the input data that is meant.  The 80-column image of this card
5 I' N2 Z# V! p; his generally the last one printed out prior to this termination message.  But possibly this last-read card has not yet been
' D% G) U- f. N/ E& \displayed, so a copy follows:
"14XX0038-1      1.E3       50.                                     -1.        1."
              KILL code number                Overlay number               Nearby statement number
6 ^2 \4 y. H) `. [                         12                          5                               4246
KILL = 12.   The bus name that was read from columns 3-8 of the last source card is unrecognizable, not having been previously
1 M# ^  {3 a6 W' m( \! Ndefined by a branch card or a switch card.  The name read from the data card is  "XX0038".   The user is not allowed to connect
+ k2 n* p/ l5 U: p/ Y7 @sources to network nodes that are not a part of the network that was previously defined by branch and switch cards of this data
case.  Any such new node would be completely disconnected from the network, so could not affect the solution.  Most probably, one or
$ \" {  ]- P9 H& n" T/ d# z3 Amore spelling errors (including the positioning of imbedded blanks) have been made in the keying of one or more node names on EMTP
data cards.
0 Y  }( Z9 ~+ l+ p0 m& V  }------------------------------------------------------------------------------------------------------------------------------------
0 r% z; h  H- Y  D& ?ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/
ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR/ERROR

shuzhiyun

这是“电流互感器”模型？学习了。一个电源、一个电流互感器，请教是做什么仿真？版主：一个非线性电感并联一个电阻是电流互感器吗？我英文看不懂，去网上翻译也是乱七八糟，看了好像填卡有问题。楼主是否可以把题目再说得明白一点？

小剑

恩，不错，学了好多东东