digsilent中模型开环测试设置完成后，如何运行？
在一份资料中看到model搭建完成后可以不连接其他设备，进行开环测试，操作如下：Verify the behaviour of the model by an open-loop test, i.e. the controller is not connected to any
other element (synchronous generator) in the grid:
Open-Loop Response:
1 Test the model with a step response to the reference voltage “usetp” (open-loop-test) .
2 Define a variable set to monitor for the VCO element and visualize the results of the simulated step response
上面第一步的具体操作过程：
#17: Open-Loop Test
1 Open the event list ( ) and use the “New Object” button to insert a “Set Parameter(EvtPara)” event
2 Select the AVR controller for the element.
3 Insert the name of the variable ‘usetp’ and the new value for this variable (=0.9).
::shocked:: 我想问的是，这些设置都做完后，接下来如何操作呢？ 补充：2 Define a variable set to monitor for the VCO element and visualize the results of the simulated step response
这一步也完成了，问：接下来怎么做？是执行计算初始条件然后开始仿真吗？ 接下来就是定义一些你要观察的变量的值，然后做仿真，显示结果。 学习一下
页:
[1]
