Line Z-T 元件的参数设置问题
哪位高手 可以告诉我 Line Z-T 元件的参数代表什么，默认单位是多少，还有哪个参数是表示线路长度的？ 哪位好心人指点一下，感激不尽~~~~ 这。。。看help很容易看懂吧 难道是help文件损坏了？help：Name : LINEZT_3 - Distributed parameters (Clarke) 3 phase. Transposed
Card : BRANCH
Data :R/l+= Resistance pr. length in . Pos. sequence.
R/l0= Resistance pr. length in . Zero sequence.
{A: ILINE=0: A=inductance L' in if Xopt.=0 }
{ A=L' in if Xopt.=power frequency. }
{ ILINE=1: A=Modal surge impedance in Z=sqrt(L'/C') }
{ ILINE=2: A=Modal surge impedance in Z=sqrt(L'/C') }
A+= Pos. sequence.
A0= Zero sequence.
{B: ILINE=0: B=capacitance C' in [鍲/length] if Copt.=0 }
{ B=C' in [鍹ho/length] if Copt.=power frequency. }
{ ILINE=1: B=propagation velocity in v=1/sqrt(C'*L') }
{ ILINE=2: B=modal travel time in T=sqrt(L'*C')*length }
Xopt. and Copt. is set in menu: ATP|Settings/Simulation.
B+= Pos. sequence.
B0= Zero sequence.
l = length of line (>0 for transposed lines)
ILINE= Takes values from 0 to 2
IPUNCH=0: lumped-resistive modelling. G'=0
=1: distortionless-mode modelling. G'=R'*C'/L'
Node : IN1= Start node. Letter 'A', 'B' or 'C'
is added to nodename for node 1, 2 and 3.
OUT1= End node. Letter 'A', 'B' or 'C'
is added to nodename for node 1, 2 and 3.
Only branch voltage output is reliable.
RuleBook: IV.D.1 回复 4# maisigete
谢谢你，我的Help文件确实损坏了。
页:
[1]
