交流社区 › ATP-EMTP › 关于ATP运行出错，KILL=12~

黑皮椰子 发表于 2011-3-22 18:58:40

关于ATP运行出错，KILL=12~

我在仿变电站的时候多处出现KILL=12的错误，不明白为什么，希望高手给予指点。
KILL = 12.   The bus name that was read from columns 3-8 of the last source card is unrecognizable, not having been previously
defined by a branch card or a switch card.The name read from the data card is"      ".   The user is not allowed to connect
sources to network nodes that are not a part of the network that was previously defined by branch and switch cards of this data
case.Any such new node would be completely disconnected from the network, so could not affect the solution.Most probably, one or
more spelling errors (including the positioning of imbedded blanks) have been made in the keying of one or more node names on EMTP
data cards.

chendong2013 发表于 2011-3-23 17:11:37

不了解，是美女，帮顶。

rankjet 发表于 2011-4-20 20:59:05

也不了解。。帮顶

liuxingyu23 发表于 2011-7-6 23:17:50

搭车同求解答！

chr_sun@126.com 发表于 2011-7-16 15:31:27

应该是 节点的 问题吧 建议 全部复制到一个新新建文件下， 重新仿。。。。不对的话，多试试 。。。总会 好的

mingyu 发表于 2011-7-16 18:51:50

The bus name that was read from columns 3-8 of the last source card is unrecognizable, not having been previously
defined by a branch card or a switch card.The name read from the data card is"      ".   The user is not allowed to connect
sources to network nodes that are not a part of the network that was previously defined by branch and switch cards of this data
case.

tianming 发表于 2011-11-17 12:05:10

节点命名的问题，

查看完整版本: 关于ATP运行出错，KILL=12~