关于MOA仿真问题

wllizc · 发表于 2012-4-16 16:02:22

马上加入，结交更多好友，共享更多资料，让你轻松玩转电力研学社区！

您需要登录才可以下载或查看，没有账号？立即加入

×

在晶闸管上并联了一个MOA，结果运行后出现了以下错误，请高手解答啊？谢谢了
TrustRegion-based algorithm due to one of the following reasons: the model is ill-defined i.e., the system equations do not have a solution; or the nonlinear equation solver failed to converge due to numerical issues.
To rule out solver convergence as the cause of this error, either
a) switch to LineSearch-based algorithm using
set_param('power_svc_1tcr3tsc','AlgebraicLoopSolver','LineSearch')
b) reducing the VariableStepDiscrete solver RelTol parameter so that the solver takes smaller time steps.
If the error persists in spite of the above changes, then the model is likely ill-defined and requires modification.

wllizc · 发表于 2012-4-20 10:38:35

请教高手啊

mingyu · 发表于 2012-4-20 22:20:16

无解，不收敛！根据提示修改。

wllizc · 发表于 2012-4-21 21:42:19

应该怎么解决收敛问题呢？一般问题出在哪啊？前辈

账号		自动登录	找回密码
密码			立即加入

关于MOA仿真问题

马上加入，结交更多好友，共享更多资料，让你轻松玩转电力研学社区！

相关帖子

浏览过的版块