psse正序阻抗问题
本帖最后由 vbv8 于 2012-5-28 11:50 编辑正序阻抗阻抗角和数值都对不上，谁能解释下 手册中有一句话：
Following the sequence network set-up, discussed in the previous section, the system Thevenin impedances, as seen at each bus where an unbalance is to be applied, are reported. Each sequence column of this table lists resistive and reactive parts of the Thevenin impedances that would be measured by observations made at each bus in turn without the influence of the prescribed set of unbalances.
似乎SCMU后得到是从故障点看去的序网阻抗而不只是机组的阻抗吧？没做过，可能说得不对。
另外，楼主的附件太大了，为什么不用文本文档呢？似乎图片也是不需要的，把机组的参数写下来就可以了。或者把内容直接贴到帖子中就可以了。附件大了，大家就不大会去下载了。别人会帮到你的机会也就很小了。 慢慢 学习 呵呵！！！！！！ 回复 2# apsal
同意APSAL的解释。
"SCMU后得到是从故障点看去的序网阻抗而不只是机组的阻抗"
页:
[1]
