PSSE32.1改进
本帖最后由 Tms320 于 2013-5-24 06:48 编辑 Sensitivity analysis functionality calculates sensitivity factors in electrical power networks
with either a simplified ‘DC’ linear network model or a full AC network model. The sensitivity
factors include branch flow to power injection of generator or load; branch flow to phase
shifter angle; bus voltage to power injection of generator or load; bus voltage to transformer
tap position, etc. These values can be used in several applications:
o Mitigate system operating limit (SOL) violations to meet NERC Reliability Standards.
o Determine the loading contribution of a line due to power injection or withdrawal of
each generator or load.
o Estimate and provide operation strategies to increase the maximum transfer
capability.
The maximum number of zero sequence mutual couplings is increased from 4,000 to 6,000
at the 50,000 bus size level. At size levels greater than 50,000 buses, additional mutual
couplings are allowed, with up to 13,890 permitted at the 150,000 bus size level.
Note: A Saved Case File with more than 4,000 mutuals cannot be read by earlier releases
of version 32.
All of the latest updates to the PSLF/WECC –>PSS®E file converters have been
incorporated.
The old style ASCC Summary Fault Currents report has been re-introduced.
Previous version Sequence files can now be created directly from the File > Save dialog.
Siemens Energy, Inc.
Additional conductors have been added to LineProp, including optical ground wires.
The WECCLF converter has been updated in order to take into account some additional
modeling conventions, including post processing steps.
The WECCDS converter has been updated and is now compatible with some of the more
recent PSLF model additions. Sensitivity analysis functionality calculates sensitivity factors in electrical power netwo ...
Tms320 发表于 2011-4-27 06:55 https://tech.cepsc.com/images/common/back.gif
曹博威武... 正在用3.0 呵呵，共享一下啊。。。 32有没有石皮解版的
哈哈
页:
[1]
