PSCAD_Vector Controlled Doubly Fed Induction Generator for Wind application
本帖最后由 windenergy 于 2010-1-17 16:33 编辑2篇paper。
----------
1.
In this paper, a DFIG power conversion system is simulated and vector
controlled for improving power quality of the grid while injecting the required active
power of the system. The system model proposed in this paper is developed in the
dedicated power electronics and system simulation tool, PSCAD/EMTDC. The model
also includes dynamic wind speed fluctuations and control of a soft starter, enabling
simulation of the power quality characteristics of the wind turbine. Based on the
simulation results, it is proved that the proposed DFIG is capable of simultaneous
capturing maximum power of wind energy with fluctuating wind speed and improving
power quality, that are achieved by cancelling the most significant and troublesome
harmonics of the utility grid. Dynamic power factor correction and reactive power
control are the other two significant features of this technology.
------------
2. This document discusses the theory of operation behind the doubly fed generator case
developed by Ani Gole (Univ. of Manitoba, Canada) and Om Nayak (Nayak Corporation,
Princeton, NJ). The controller concept is based on the paper by Pena et al .
谢谢，正需要啊:) 貌似不能下载啊 回复 3# imlmx
我也是刚刚第一次上传东西。。。不知道。。你确定不能下载吗 可以，是我点数不够了 回复 5# imlmx
我取消了限制。。 谢谢啊，好资料！ 谢谢了，好东西。学习一下 怎么下载？ 回复 1# windenergy
好东西^_^
