交流社区 › ATP-EMTP › 新手求助，仿真单相接地故障时一直出现循环开关的问题

lqbyhyy 发表于 2016-2-7 11:18:18

新手求助，仿真单相接地故障时一直出现循环开关的问题

做单相接地故障仿真时，仿真后出现如下提示
KILL = 64.   Switch connectivity error.SUBROUTINE SWITCH,which is used to make the logic changes associated with a modification
of switch status, has just determined that an error is about to occur.A loop of closed switches is about to be created, touching
node"......".   Such closed switch loops make the network solution indeterminate, and are not allowed by the program.
求教如何改正

wangdc 发表于 2016-2-22 11:24:47

你这个线路末端加了一个电抗和电阻？想模拟负荷么？

luokun5506 发表于 2016-2-24 10:13:52

电阻阻值多少

cuicui 发表于 2016-5-26 15:45:50

楼主线路模型KCLee参数如何设置的呀，谢谢

cuicui 发表于 2016-5-29 22:29:21

这个帖子不错，大家快来顶起来！

查看完整版本: 新手求助，仿真单相接地故障时一直出现循环开关的问题